And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.104
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.933
And
I accept adding "cowsay" to Additional Software
5.842
And
Additional Software is correctly configured for package "cowsay"
0.912
And
I shutdown Tails and wait for the computer to power off
6.750
And
I start Tails from USB drive "__internal" with network unplugged
1:1.795
And
I enable persistence
13.294
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
46.028
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.138
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.075
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.136
And
I can open the Additional Software configuration window from the notification
2.401
And
I shutdown Tails and wait for the computer to power off
2:1.719
And
I start Tails from USB drive "__internal" with network unplugged
1:0.402
And
I enable persistence
12.946
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
44.059
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.375
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.122