And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:37.334
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.790
And
I accept adding "cowsay" to Additional Software
6.236
And
Additional Software is correctly configured for package "cowsay"
0.997
And
I shutdown Tails and wait for the computer to power off
6.808
And
I start Tails from USB drive "__internal" with network unplugged
1:8.467
And
I enable persistence
14.192
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
47.115
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.806
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.066
And
available upgrades have been checked
2.356
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.183
And
I can open the Additional Software configuration window from the notification
3.047
And
I shutdown Tails and wait for the computer to power off
12.707
And
I start Tails from USB drive "__internal" with network unplugged
1:4.879
And
I enable persistence
13.574
And
I configure APT to prefer an old version of cowsay
0.044
And
I log in to a new session
43.767
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.327
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.091
Then
the Additional Software upgrade service has started
0.212
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.136