And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.829
And
I configure APT to prefer an old version of cowsay
0.091
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
34.683
And
I accept adding "cowsay" to Additional Software
8.111
And
Additional Software is correctly configured for package "cowsay"
1.316
And
I shutdown Tails and wait for the computer to power off
7.352
And
I start Tails from USB drive "__internal" with network unplugged
1:12.022
And
I enable persistence
13.929
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
43.880
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.454
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
I prepare the Additional Software upgrade process to fail
0.088
And
the network is plugged
0.082
And
available upgrades have been checked
0.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.511
And
I can open the Additional Software configuration window from the notification
2.849
And
I shutdown Tails and wait for the computer to power off
2:4.354
And
I start Tails from USB drive "__internal" with network unplugged
1:5.534
And
I enable persistence
16.601
And
I configure APT to prefer an old version of cowsay
0.047
And
I log in to a new session
44.183
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.098
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.105
Then
the Additional Software upgrade service has started
0.272
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.122