And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.301
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.826
And
I accept adding "cowsay" to Additional Software
7.281
And
Additional Software is correctly configured for package "cowsay"
0.971
And
I shutdown Tails and wait for the computer to power off
6.187
And
I start Tails from USB drive "__internal" with network unplugged
1:7.314
And
I enable persistence
11.760
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
42.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.700
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.064
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.182
And
I can open the Additional Software configuration window from the notification
3.752
And
I shutdown Tails and wait for the computer to power off
2:6.901
And
I start Tails from USB drive "__internal" with network unplugged
1:0.733
And
I enable persistence
12.636
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
48.727
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.192
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092