And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:49.965
And
I configure APT to prefer an old version of cowsay
0.041
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.769
And
I accept adding "cowsay" to Additional Software
4.497
And
Additional Software is correctly configured for package "cowsay"
1.030
And
I shutdown Tails and wait for the computer to power off
7.118
And
I start Tails from USB drive "__internal" with network unplugged
1:16.477
And
I enable persistence
11.411
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
43.574
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.100
And
the network is plugged
0.081
And
available upgrades have been checked
1.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.615
And
I can open the Additional Software configuration window from the notification
3.111
And
I shutdown Tails and wait for the computer to power off
2:8.393
And
I start Tails from USB drive "__internal" with network unplugged
1:9.071
And
I enable persistence
14.634
And
I configure APT to prefer an old version of cowsay
0.064
And
I log in to a new session
46.994
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.093
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.223
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078