And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.629
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.151
And
I accept adding "cowsay" to Additional Software
7.458
And
Additional Software is correctly configured for package "cowsay"
1.020
And
I shutdown Tails and wait for the computer to power off
6.462
And
I start Tails from USB drive "__internal" with network unplugged
1:3.347
And
I enable persistence
12.162
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
42.314
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.366
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.100
And
available upgrades have been checked
1.162
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.700
And
I can open the Additional Software configuration window from the notification
2.993
And
I shutdown Tails and wait for the computer to power off
12.868
And
I start Tails from USB drive "__internal" with network unplugged
1:2.219
And
I enable persistence
12.337
And
I configure APT to prefer an old version of cowsay
0.091
And
I log in to a new session
39.504
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.273
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108