And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.338
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.666
And
I accept adding "cowsay" to Additional Software
3.317
And
Additional Software is correctly configured for package "cowsay"
1.005
And
I shutdown Tails and wait for the computer to power off
4.431
And
I start Tails from USB drive "__internal" with network unplugged
1:1.670
And
I enable persistence
17.755
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
41.022
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.553
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.087
And
available upgrades have been checked
0.066
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.168
And
I can open the Additional Software configuration window from the notification
2.418
And
I shutdown Tails and wait for the computer to power off
13.444
And
I start Tails from USB drive "__internal" with network unplugged
1:2.853
And
I enable persistence
14.227
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
47.438
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.860
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.272
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.115