And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:36.390
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.531
And
I accept adding "cowsay" to Additional Software
4.387
And
Additional Software is correctly configured for package "cowsay"
0.904
And
I shutdown Tails and wait for the computer to power off
6.731
And
I start Tails from USB drive "__internal" with network unplugged
1:6.354
And
I enable persistence
13.523
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
37.689
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.568
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.097
And
the network is plugged
0.101
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.781
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
2:2.654
And
I start Tails from USB drive "__internal" with network unplugged
1:5.410
And
I enable persistence
18.251
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
33.776
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.200
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.125