And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.278
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.033
And
I accept adding "cowsay" to Additional Software
5.689
And
Additional Software is correctly configured for package "cowsay"
1.100
And
I shutdown Tails and wait for the computer to power off
6.513
And
I start Tails from USB drive "__internal" with network unplugged
1:3.219
And
I enable persistence
13.928
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
43.801
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.678
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.101
And
available upgrades have been checked
1.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.932
And
I can open the Additional Software configuration window from the notification
3.076
And
I shutdown Tails and wait for the computer to power off
13.507
And
I start Tails from USB drive "__internal" with network unplugged
1:5.091
And
I enable persistence
10.455
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.880
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.408
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100