And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.263
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.628
And
I accept adding "cowsay" to Additional Software
4.775
And
Additional Software is correctly configured for package "cowsay"
1.081
And
I shutdown Tails and wait for the computer to power off
7.040
And
I start Tails from USB drive "__internal" with network unplugged
1:6.601
And
I enable persistence
14.078
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.100
And
I log in to a new session
47.738
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.698
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.092
And
I prepare the Additional Software upgrade process to fail
0.142
And
the network is plugged
0.107
And
available upgrades have been checked
2.466
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.673
And
I can open the Additional Software configuration window from the notification
2.407
And
I shutdown Tails and wait for the computer to power off
2:2.673
And
I start Tails from USB drive "__internal" with network unplugged
1:10.076
And
I enable persistence
18.034
And
I configure APT to prefer an old version of cowsay
0.065
And
I log in to a new session
34.272
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.999
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
the network is plugged
0.125
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098