And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:25.511
And
I configure APT to prefer an old version of cowsay
0.047
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.527
And
I accept adding "cowsay" to Additional Software
5.430
And
Additional Software is correctly configured for package "cowsay"
1.040
And
I shutdown Tails and wait for the computer to power off
6.883
And
I start Tails from USB drive "__internal" with network unplugged
1:5.485
And
I enable persistence
24.720
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.127
And
I log in to a new session
46.242
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.943
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.104
And
available upgrades have been checked
1.348
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.072
And
I can open the Additional Software configuration window from the notification
3.567
And
I shutdown Tails and wait for the computer to power off
2:7.606
And
I start Tails from USB drive "__internal" with network unplugged
1:3.563
And
I enable persistence
12.921
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
49.537
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.999
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.117
Then
the Additional Software upgrade service has started
0.226
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.116