And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.988
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.761
And
I accept adding "cowsay" to Additional Software
6.653
And
Additional Software is correctly configured for package "cowsay"
0.942
And
I shutdown Tails and wait for the computer to power off
6.361
And
I start Tails from USB drive "__internal" with network unplugged
1:1.837
And
I enable persistence
10.700
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
39.249
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.520
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.106
And
available upgrades have been checked
1.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.286
And
I can open the Additional Software configuration window from the notification
2.529
And
I shutdown Tails and wait for the computer to power off
18.097
And
I start Tails from USB drive "__internal" with network unplugged
1:1.291
And
I enable persistence
13.070
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
40.269
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.088
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.124