And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:39.683
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.488
And
I accept adding "cowsay" to Additional Software
4.810
And
Additional Software is correctly configured for package "cowsay"
1.094
And
I shutdown Tails and wait for the computer to power off
6.597
And
I start Tails from USB drive "__internal" with network unplugged
1:5.443
And
I enable persistence
12.768
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
42.655
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.691
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.078
And
available upgrades have been checked
1.226
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.980
And
I can open the Additional Software configuration window from the notification
4.919
And
I shutdown Tails and wait for the computer to power off
2:7.818
And
I start Tails from USB drive "__internal" with network unplugged
1:6.952
And
I enable persistence
14.507
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
34.822
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.545
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
the network is plugged
0.103
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.163