And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.028
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.580
And
I accept adding "cowsay" to Additional Software
6.685
And
Additional Software is correctly configured for package "cowsay"
0.841
And
I shutdown Tails and wait for the computer to power off
6.415
And
I start Tails from USB drive "__internal" with network unplugged
1:1.414
And
I enable persistence
11.822
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
39.413
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.134
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.092
And
available upgrades have been checked
1.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.646
And
I can open the Additional Software configuration window from the notification
2.342
And
I shutdown Tails and wait for the computer to power off
18.368
And
I start Tails from USB drive "__internal" with network unplugged
58.677
And
I enable persistence
10.510
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.408
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098