And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.927
And
I configure APT to prefer an old version of cowsay
0.040
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.651
And
I accept adding "cowsay" to Additional Software
4.794
And
Additional Software is correctly configured for package "cowsay"
1.079
And
I shutdown Tails and wait for the computer to power off
6.950
And
I start Tails from USB drive "__internal" with network unplugged
1:4.127
And
I enable persistence
13.360
And
I configure APT to prefer an old version of cowsay
0.038
And
I disable the tails-virt-notify-user.service user unit
0.126
And
I log in to a new session
43.097
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.116
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.097
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.900
And
I can open the Additional Software configuration window from the notification
3.041
And
I shutdown Tails and wait for the computer to power off
2:2.297
And
I start Tails from USB drive "__internal" with network unplugged
1:4.600
And
I enable persistence
12.595
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.216
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.628
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.230
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.164