And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.879
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.432
And
I accept adding "cowsay" to Additional Software
4.640
And
Additional Software is correctly configured for package "cowsay"
1.033
And
I shutdown Tails and wait for the computer to power off
4.738
And
I start Tails from USB drive "__internal" with network unplugged
1:13.077
And
I enable persistence
19.526
And
I configure APT to prefer an old version of cowsay
0.042
And
I disable the tails-virt-notify-user.service user unit
0.112
And
I log in to a new session
43.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.241
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.096
And
available upgrades have been checked
0.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.879
And
I can open the Additional Software configuration window from the notification
5.127
And
I shutdown Tails and wait for the computer to power off
20.898
And
I start Tails from USB drive "__internal" with network unplugged
1:4.189
And
I enable persistence
12.096
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.182
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.838
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
the network is plugged
0.093
Then
the Additional Software upgrade service has started
0.172
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094