And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.277
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.784
And
I accept adding "cowsay" to Additional Software
6.720
And
Additional Software is correctly configured for package "cowsay"
0.945
And
I shutdown Tails and wait for the computer to power off
6.531
And
I start Tails from USB drive "__internal" with network unplugged
1:1.306
And
I enable persistence
12.620
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
45.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.705
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.065
And
available upgrades have been checked
1.194
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.743
And
I can open the Additional Software configuration window from the notification
2.487
And
I shutdown Tails and wait for the computer to power off
2:3.375
And
I start Tails from USB drive "__internal" with network unplugged
1:1.830
And
I enable persistence
13.536
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
45.849
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.257
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118