And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:43.866
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.519
And
I accept adding "cowsay" to Additional Software
4.551
And
Additional Software is correctly configured for package "cowsay"
1.189
And
I shutdown Tails and wait for the computer to power off
6.926
And
I start Tails from USB drive "__internal" with network unplugged
1:5.591
And
I enable persistence
14.981
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
45.429
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.471
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.123
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.660
And
I can open the Additional Software configuration window from the notification
3.418
And
I shutdown Tails and wait for the computer to power off
2:8.342
And
I start Tails from USB drive "__internal" with network unplugged
1:3.466
And
I enable persistence
10.304
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
43.152
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.402
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.233
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.134