And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:57.401
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.716
And
I accept adding "cowsay" to Additional Software
7.154
And
Additional Software is correctly configured for package "cowsay"
0.908
And
I shutdown Tails and wait for the computer to power off
6.704
And
I start Tails from USB drive "__internal" with network unplugged
1:2.566
And
I enable persistence
11.813
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
40.323
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.065
And
available upgrades have been checked
0.076
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.688
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
18.076
And
I start Tails from USB drive "__internal" with network unplugged
1:1.408
And
I enable persistence
11.082
And
I configure APT to prefer an old version of cowsay
0.041
And
I log in to a new session
41.655
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.620
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
the network is plugged
0.102
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102