And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.570
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.409
And
I accept adding "cowsay" to Additional Software
7.448
And
Additional Software is correctly configured for package "cowsay"
1.110
And
I shutdown Tails and wait for the computer to power off
6.455
And
I start Tails from USB drive "__internal" with network unplugged
1:8.617
And
I enable persistence
14.787
And
I configure APT to prefer an old version of cowsay
0.045
And
I disable the tails-virt-notify-user.service user unit
0.113
And
I log in to a new session
47.446
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.546
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.094
And
the network is plugged
0.077
And
available upgrades have been checked
1.145
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.495
And
I can open the Additional Software configuration window from the notification
2.925
And
I shutdown Tails and wait for the computer to power off
2:7.178
And
I start Tails from USB drive "__internal" with network unplugged
1:4.747
And
I enable persistence
15.515
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
43.680
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.296
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.122
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111