And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:32.651
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.993
And
I accept adding "cowsay" to Additional Software
5.520
And
Additional Software is correctly configured for package "cowsay"
1.158
And
I shutdown Tails and wait for the computer to power off
6.717
And
I start Tails from USB drive "__internal" with network unplugged
1:4.948
And
I enable persistence
14.128
And
I configure APT to prefer an old version of cowsay
0.050
And
I disable the tails-virt-notify-user.service user unit
0.112
And
I log in to a new session
44.045
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.802
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.083
And
available upgrades have been checked
0.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.530
And
I can open the Additional Software configuration window from the notification
3.063
And
I shutdown Tails and wait for the computer to power off
15.085
And
I start Tails from USB drive "__internal" with network unplugged
1:7.209
And
I enable persistence
11.845
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
49.648
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102