And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.755
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.425
And
I accept adding "cowsay" to Additional Software
4.536
And
Additional Software is correctly configured for package "cowsay"
1.030
And
I shutdown Tails and wait for the computer to power off
6.769
And
I start Tails from USB drive "__internal" with network unplugged
1:4.087
And
I enable persistence
14.923
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.118
And
I log in to a new session
45.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.122
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.102
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.663
And
I can open the Additional Software configuration window from the notification
3.646
And
I shutdown Tails and wait for the computer to power off
13.089
And
I start Tails from USB drive "__internal" with network unplugged
1:5.992
And
I enable persistence
13.717
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
48.116
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.237
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.142
Then
the Additional Software upgrade service has started
0.204
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.113