And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:40.636
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.424
And
I accept adding "cowsay" to Additional Software
4.554
And
Additional Software is correctly configured for package "cowsay"
1.172
And
I shutdown Tails and wait for the computer to power off
6.499
And
I start Tails from USB drive "__internal" with network unplugged
1:7.286
And
I enable persistence
14.388
And
I configure APT to prefer an old version of cowsay
0.049
And
I disable the tails-virt-notify-user.service user unit
0.115
And
I log in to a new session
44.383
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.830
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.667
And
available upgrades have been checked
0.064
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.139
And
I can open the Additional Software configuration window from the notification
4.595
And
I shutdown Tails and wait for the computer to power off
2:8.602
And
I start Tails from USB drive "__internal" with network unplugged
1:4.351
And
I enable persistence
11.680
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
46.705
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.611
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.091
And
the network is plugged
0.126
Then
the Additional Software upgrade service has started
0.249
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.126