And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.624
And
I configure APT to prefer an old version of cowsay
0.041
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.529
And
I accept adding "cowsay" to Additional Software
4.899
And
Additional Software is correctly configured for package "cowsay"
0.918
And
I shutdown Tails and wait for the computer to power off
6.610
And
I start Tails from USB drive "__internal" with network unplugged
1:1.067
And
I enable persistence
11.397
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
40.121
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.770
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.085
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.061
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.181
And
I can open the Additional Software configuration window from the notification
3.775
And
I shutdown Tails and wait for the computer to power off
18.619
And
I start Tails from USB drive "__internal" with network unplugged
1:1.770
And
I enable persistence
11.740
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
40.775
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.483
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.119
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097