And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.761
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.144
And
I accept adding "cowsay" to Additional Software
5.814
And
Additional Software is correctly configured for package "cowsay"
0.873
And
I shutdown Tails and wait for the computer to power off
6.699
And
I start Tails from USB drive "__internal" with network unplugged
1:1.224
And
I enable persistence
12.657
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
41.053
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.096
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.074
And
available upgrades have been checked
1.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.166
And
I can open the Additional Software configuration window from the notification
2.597
And
I shutdown Tails and wait for the computer to power off
2:3.747
And
I start Tails from USB drive "__internal" with network unplugged
1:0.171
And
I enable persistence
10.679
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
41.206
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.307
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096