And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:38.759
And
I configure APT to prefer an old version of cowsay
0.044
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.397
And
I accept adding "cowsay" to Additional Software
6.749
And
Additional Software is correctly configured for package "cowsay"
1.019
And
I shutdown Tails and wait for the computer to power off
6.491
And
I start Tails from USB drive "__internal" with network unplugged
1:3.595
And
I enable persistence
12.570
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
40.569
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.510
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.083
And
the network is plugged
0.077
And
available upgrades have been checked
1.154
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.110
And
I can open the Additional Software configuration window from the notification
4.017
And
I shutdown Tails and wait for the computer to power off
2:2.381
And
I start Tails from USB drive "__internal" with network unplugged
1:2.667
And
I enable persistence
15.066
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
41.543
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.457
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102