And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:37.520
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.989
And
I accept adding "cowsay" to Additional Software
4.795
And
Additional Software is correctly configured for package "cowsay"
1.058
And
I shutdown Tails and wait for the computer to power off
6.797
And
I start Tails from USB drive "__internal" with network unplugged
1:2.133
And
I enable persistence
13.406
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
33.330
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.997
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.075
And
available upgrades have been checked
1.250
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.853
And
I can open the Additional Software configuration window from the notification
2.736
And
I shutdown Tails and wait for the computer to power off
2:8.776
And
I start Tails from USB drive "__internal" with network unplugged
1:6.164
And
I enable persistence
12.415
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
43.537
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.770
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.098
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100