And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.979
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.686
And
I accept adding "cowsay" to Additional Software
6.919
And
Additional Software is correctly configured for package "cowsay"
1.020
And
I shutdown Tails and wait for the computer to power off
6.386
And
I start Tails from USB drive "__internal" with network unplugged
1:2.491
And
I enable persistence
11.026
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.104
And
I log in to a new session
39.375
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.265
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.080
And
available upgrades have been checked
1.164
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.133
And
I can open the Additional Software configuration window from the notification
2.366
And
I shutdown Tails and wait for the computer to power off
2:3.788
And
I start Tails from USB drive "__internal" with network unplugged
1:0.765
And
I enable persistence
11.905
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
40.773
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.521
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.121