And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.575
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.383
And
I accept adding "cowsay" to Additional Software
5.566
And
Additional Software is correctly configured for package "cowsay"
0.967
And
I shutdown Tails and wait for the computer to power off
6.564
And
I start Tails from USB drive "__internal" with network unplugged
1:0.334
And
I enable persistence
11.137
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
39.292
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.029
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.070
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.694
And
I can open the Additional Software configuration window from the notification
3.737
And
I shutdown Tails and wait for the computer to power off
12.977
And
I start Tails from USB drive "__internal" with network unplugged
1:0.980
And
I enable persistence
12.849
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
40.723
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108