And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.913
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.195
And
I accept adding "cowsay" to Additional Software
6.744
And
Additional Software is correctly configured for package "cowsay"
1.004
And
I shutdown Tails and wait for the computer to power off
6.628
And
I start Tails from USB drive "__internal" with network unplugged
1:2.114
And
I enable persistence
11.217
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
39.496
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.545
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.146
And
available upgrades have been checked
1.140
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.195
And
I can open the Additional Software configuration window from the notification
2.408
And
I shutdown Tails and wait for the computer to power off
13.264
And
I start Tails from USB drive "__internal" with network unplugged
1:1.407
And
I enable persistence
12.799
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
46.034
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.848
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.080
Then
the Additional Software upgrade service has started
0.183
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.117