And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.042
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.594
And
I accept adding "cowsay" to Additional Software
4.716
And
Additional Software is correctly configured for package "cowsay"
0.921
And
I shutdown Tails and wait for the computer to power off
6.698
And
I start Tails from USB drive "__internal" with network unplugged
1:2.009
And
I enable persistence
16.002
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
45.079
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.397
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.095
And
available upgrades have been checked
1.189
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.422
And
I can open the Additional Software configuration window from the notification
3.139
And
I shutdown Tails and wait for the computer to power off
2:6.845
And
I start Tails from USB drive "__internal" with network unplugged
1:3.375
And
I enable persistence
13.230
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
47.762
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.286
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.204
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098