And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.844
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.368
And
I accept adding "cowsay" to Additional Software
4.847
And
Additional Software is correctly configured for package "cowsay"
1.012
And
I shutdown Tails and wait for the computer to power off
6.928
And
I start Tails from USB drive "__internal" with network unplugged
1:5.194
And
I enable persistence
13.910
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.138
And
I log in to a new session
42.281
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.575
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.123
And
the network is plugged
0.107
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.746
And
I can open the Additional Software configuration window from the notification
2.766
And
I shutdown Tails and wait for the computer to power off
2:8.468
And
I start Tails from USB drive "__internal" with network unplugged
1:4.090
And
I enable persistence
13.612
And
I configure APT to prefer an old version of cowsay
0.042
And
I log in to a new session
52.039
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.471
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.096
Then
the Additional Software upgrade service has started
0.207
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.118