And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.162
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.445
And
I accept adding "cowsay" to Additional Software
6.474
And
Additional Software is correctly configured for package "cowsay"
0.900
And
I shutdown Tails and wait for the computer to power off
6.513
And
I start Tails from USB drive "__internal" with network unplugged
58.140
And
I enable persistence
11.112
And
I configure APT to prefer an old version of cowsay
0.067
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
38.025
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.068
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.846
And
I can open the Additional Software configuration window from the notification
2.308
And
I shutdown Tails and wait for the computer to power off
13.395
And
I start Tails from USB drive "__internal" with network unplugged
1:0.590
And
I enable persistence
11.757
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.607
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.933
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.146
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077