And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.578
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.625
And
I accept adding "cowsay" to Additional Software
6.934
And
Additional Software is correctly configured for package "cowsay"
0.886
And
I shutdown Tails and wait for the computer to power off
6.401
And
I start Tails from USB drive "__internal" with network unplugged
1:0.125
And
I enable persistence
11.847
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
39.247
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.076
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.630
And
I can open the Additional Software configuration window from the notification
3.078
And
I shutdown Tails and wait for the computer to power off
2:6.924
And
I start Tails from USB drive "__internal" with network unplugged
1:0.194
And
I enable persistence
10.863
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
46.365
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
30.744
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094