And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:47.948
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.937
And
I accept adding "cowsay" to Additional Software
5.303
And
Additional Software is correctly configured for package "cowsay"
0.813
And
I shutdown Tails and wait for the computer to power off
6.415
And
I start Tails from USB drive "__internal" with network unplugged
1:1.468
And
I enable persistence
11.387
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
34.230
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.629
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.101
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.276
And
I can open the Additional Software configuration window from the notification
3.135
And
I shutdown Tails and wait for the computer to power off
2:2.335
And
I start Tails from USB drive "__internal" with network unplugged
1:7.493
And
I enable persistence
13.237
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.768
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.540
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.089
Then
the Additional Software upgrade service has started
0.208
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085