And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.470
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.403
And
I accept adding "cowsay" to Additional Software
6.441
And
Additional Software is correctly configured for package "cowsay"
0.873
And
I shutdown Tails and wait for the computer to power off
6.436
And
I start Tails from USB drive "__internal" with network unplugged
58.532
And
I enable persistence
12.212
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
43.956
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.680
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.076
And
available upgrades have been checked
0.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.237
And
I can open the Additional Software configuration window from the notification
2.648
And
I shutdown Tails and wait for the computer to power off
13.528
And
I start Tails from USB drive "__internal" with network unplugged
58.397
And
I enable persistence
11.428
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
37.870
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.196
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082