And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.389
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.126
And
I accept adding "cowsay" to Additional Software
7.484
And
Additional Software is correctly configured for package "cowsay"
1.113
And
I shutdown Tails and wait for the computer to power off
6.582
And
I start Tails from USB drive "__internal" with network unplugged
1:0.652
And
I enable persistence
13.994
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
43.091
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.593
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.078
And
the network is plugged
0.150
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.952
And
I can open the Additional Software configuration window from the notification
2.674
And
I shutdown Tails and wait for the computer to power off
2:4.515
And
I start Tails from USB drive "__internal" with network unplugged
1:2.694
And
I enable persistence
16.633
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
42.278
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.703
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082