And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:37.467
And
I configure APT to prefer an old version of cowsay
0.047
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.386
And
I accept adding "cowsay" to Additional Software
7.747
And
Additional Software is correctly configured for package "cowsay"
1.092
And
I shutdown Tails and wait for the computer to power off
7.045
And
I start Tails from USB drive "__internal" with network unplugged
1:7.166
And
I enable persistence
15.322
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.088
And
I log in to a new session
42.659
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.576
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.100
And
available upgrades have been checked
0.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.580
And
I can open the Additional Software configuration window from the notification
3.001
And
I shutdown Tails and wait for the computer to power off
10.969
And
I start Tails from USB drive "__internal" with network unplugged
1:10.209
And
I enable persistence
19.996
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
43.005
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.608
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.109
Then
the Additional Software upgrade service has started
0.146
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089