And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.820
And
I configure APT to prefer an old version of cowsay
0.036
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.450
And
I accept adding "cowsay" to Additional Software
4.413
And
Additional Software is correctly configured for package "cowsay"
0.935
And
I shutdown Tails and wait for the computer to power off
6.500
And
I start Tails from USB drive "__internal" with network unplugged
1:9.807
And
I enable persistence
11.701
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
39.959
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.593
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.116
And
I prepare the Additional Software upgrade process to fail
0.123
And
the network is plugged
0.082
And
available upgrades have been checked
0.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.836
And
I can open the Additional Software configuration window from the notification
3.347
And
I shutdown Tails and wait for the computer to power off
19.393
And
I start Tails from USB drive "__internal" with network unplugged
1:4.160
And
I enable persistence
11.758
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
45.197
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.815
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.273
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080