And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:37.472
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.728
And
I accept adding "cowsay" to Additional Software
7.200
And
Additional Software is correctly configured for package "cowsay"
1.049
And
I shutdown Tails and wait for the computer to power off
4.499
And
I start Tails from USB drive "__internal" with network unplugged
1:1.523
And
I enable persistence
12.753
And
I configure APT to prefer an old version of cowsay
0.113
And
I disable the tails-virt-notify-user.service user unit
0.262
And
I log in to a new session
38.570
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.104
And
the network is plugged
0.072
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.584
And
I can open the Additional Software configuration window from the notification
3.037
And
I shutdown Tails and wait for the computer to power off
17.640
And
I start Tails from USB drive "__internal" with network unplugged
1:1.877
And
I enable persistence
15.888
And
I configure APT to prefer an old version of cowsay
0.035
And
I log in to a new session
46.674
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.954
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.095
Then
the Additional Software upgrade service has started
0.216
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.107