And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:33.229
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.163
And
I accept adding "cowsay" to Additional Software
4.443
And
Additional Software is correctly configured for package "cowsay"
1.053
And
I shutdown Tails and wait for the computer to power off
6.424
And
I start Tails from USB drive "__internal" with network unplugged
1:5.150
And
I enable persistence
14.408
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.112
And
I log in to a new session
47.118
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.108
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.093
And
available upgrades have been checked
2.520
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.417
And
I can open the Additional Software configuration window from the notification
2.958
And
I shutdown Tails and wait for the computer to power off
2:2.615
And
I start Tails from USB drive "__internal" with network unplugged
1:22.099
And
I enable persistence
16.210
And
I configure APT to prefer an old version of cowsay
0.047
And
I log in to a new session
48.613
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.506
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.120
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087