And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:4.514
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
37.865
And
I accept adding "cowsay" to Additional Software
8.012
And
Additional Software is correctly configured for package "cowsay"
2.043
And
I shutdown Tails and wait for the computer to power off
6.277
And
I start Tails from USB drive "__internal" with network unplugged
1:17.269
And
I enable persistence
18.513
And
I configure APT to prefer an old version of cowsay
0.032
And
I disable the tails-virt-notify-user.service user unit
0.089
And
I log in to a new session
45.010
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
54.883
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.113
And
I prepare the Additional Software upgrade process to fail
0.178
And
the network is plugged
0.255
And
available upgrades have been checked
1.407
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
6.481
And
I can open the Additional Software configuration window from the notification
7.117
And
I shutdown Tails and wait for the computer to power off
16.169
And
I start Tails from USB drive "__internal" with network unplugged
1:23.104
And
I enable persistence
17.294
And
I configure APT to prefer an old version of cowsay
0.039
And
I log in to a new session
50.964
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
46.453
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.150
And
the network is plugged
0.141
Then
the Additional Software upgrade service has started
0.293
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.140