And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:9.644
And
I configure APT to prefer an old version of cowsay
0.166
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.394
And
I accept adding "cowsay" to Additional Software
8.913
And
Additional Software is correctly configured for package "cowsay"
1.756
And
I shutdown Tails and wait for the computer to power off
6.824
And
I start Tails from USB drive "__internal" with network unplugged
1:19.400
And
I enable persistence
18.772
And
I configure APT to prefer an old version of cowsay
0.031
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
59.621
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.976
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.122
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.076
And
available upgrades have been checked
0.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.831
And
I can open the Additional Software configuration window from the notification
3.396
And
I shutdown Tails and wait for the computer to power off
14.016
And
I start Tails from USB drive "__internal" with network unplugged
1:21.552
And
I enable persistence
16.212
And
I configure APT to prefer an old version of cowsay
0.044
And
I log in to a new session
50.411
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
55.334
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
1.093
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.953