And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:29.193
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
28.995
And
I accept adding "cowsay" to Additional Software
5.619
And
Additional Software is correctly configured for package "cowsay"
0.968
And
I shutdown Tails and wait for the computer to power off
6.527
And
I start Tails from USB drive "__internal" with network unplugged
1:2.983
And
I enable persistence
12.140
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.098
And
I log in to a new session
41.693
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.330
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.071
And
available upgrades have been checked
1.183
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.180
And
I can open the Additional Software configuration window from the notification
2.694
And
I shutdown Tails and wait for the computer to power off
18.786
And
I start Tails from USB drive "__internal" with network unplugged
1:2.477
And
I enable persistence
10.358
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
44.231
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.697
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094