And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.442
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.272
And
I accept adding "cowsay" to Additional Software
5.781
And
Additional Software is correctly configured for package "cowsay"
0.904
And
I shutdown Tails and wait for the computer to power off
6.403
And
I start Tails from USB drive "__internal" with network unplugged
1:1.519
And
I enable persistence
13.099
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
46.057
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.728
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.070
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.728
And
I can open the Additional Software configuration window from the notification
3.454
And
I shutdown Tails and wait for the computer to power off
2:2.501
And
I start Tails from USB drive "__internal" with network unplugged
1:9.679
And
I enable persistence
11.566
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
41.530
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.738
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081