And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:9.307
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
34.997
And
I accept adding "cowsay" to Additional Software
5.060
And
Additional Software is correctly configured for package "cowsay"
0.936
And
I shutdown Tails and wait for the computer to power off
6.740
And
I start Tails from USB drive "__internal" with network unplugged
1:26.877
And
I enable persistence
20.479
And
I configure APT to prefer an old version of cowsay
0.033
And
I disable the tails-virt-notify-user.service user unit
0.136
And
I log in to a new session
47.550
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
45.816
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.337
And
I prepare the Additional Software upgrade process to fail
1.237
And
the network is plugged
0.372
And
available upgrades have been checked
0.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.881
And
I can open the Additional Software configuration window from the notification
3.240
And
I shutdown Tails and wait for the computer to power off
2:6.349
And
I start Tails from USB drive "__internal" with network unplugged
1:24.672
And
I enable persistence
16.586
And
I configure APT to prefer an old version of cowsay
0.136
And
I log in to a new session
49.052
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
53.603
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.120
And
the network is plugged
0.120
Then
the Additional Software upgrade service has started
0.222
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.255