And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:12.330
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.049
And
I accept adding "cowsay" to Additional Software
7.415
And
Additional Software is correctly configured for package "cowsay"
0.950
And
I shutdown Tails and wait for the computer to power off
7.181
And
I start Tails from USB drive "__internal" with network unplugged
1:25.489
And
I enable persistence
18.398
And
I configure APT to prefer an old version of cowsay
1.010
And
I disable the tails-virt-notify-user.service user unit
0.553
And
I log in to a new session
46.875
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.691
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.128
And
the network is plugged
0.228
And
available upgrades have been checked
0.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.100
And
I can open the Additional Software configuration window from the notification
2.905
And
I shutdown Tails and wait for the computer to power off
19.094
And
I start Tails from USB drive "__internal" with network unplugged
1:23.613
And
I enable persistence
18.687
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
54.214
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.280
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.104
Then
the Additional Software upgrade service has started
0.662
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.244