And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.231
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.259
And
I accept adding "cowsay" to Additional Software
4.092
And
Additional Software is correctly configured for package "cowsay"
1.132
And
I shutdown Tails and wait for the computer to power off
6.192
And
I start Tails from USB drive "__internal" with network unplugged
1:1.858
And
I enable persistence
11.873
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
41.665
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.075
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.244
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
6.881
And
I start Tails from USB drive "__internal" with network unplugged
1:1.809
And
I enable persistence
11.999
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.147
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.641
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078