And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:18.707
And
I configure APT to prefer an old version of cowsay
0.051
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
34.450
And
I accept adding "cowsay" to Additional Software
6.931
And
Additional Software is correctly configured for package "cowsay"
2.543
And
I shutdown Tails and wait for the computer to power off
8.468
And
I start Tails from USB drive "__internal" with network unplugged
1:22.408
And
I enable persistence
16.365
And
I configure APT to prefer an old version of cowsay
0.042
And
I disable the tails-virt-notify-user.service user unit
0.170
And
I log in to a new session
49.618
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
45.023
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.216
And
I prepare the Additional Software upgrade process to fail
0.180
And
the network is plugged
0.478
And
available upgrades have been checked
0.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.581
And
I can open the Additional Software configuration window from the notification
3.761
And
I shutdown Tails and wait for the computer to power off
2:2.501
And
I start Tails from USB drive "__internal" with network unplugged
1:25.059
And
I enable persistence
17.857
And
I configure APT to prefer an old version of cowsay
0.050
And
I log in to a new session
1:10.019
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
33.541
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.086
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
1.209
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.703