And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
3:8.400
And
I configure APT to prefer an old version of cowsay
0.325
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
32.152
And
I accept adding "cowsay" to Additional Software
10.793
And
Additional Software is correctly configured for package "cowsay"
2.504
And
I shutdown Tails and wait for the computer to power off
7.073
And
I start Tails from USB drive "__internal" with network unplugged
1:24.538
And
I enable persistence
21.521
And
I configure APT to prefer an old version of cowsay
0.126
And
I disable the tails-virt-notify-user.service user unit
0.165
And
I log in to a new session
47.960
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
43.671
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.085
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.074
And
available upgrades have been checked
0.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.257
And
I can open the Additional Software configuration window from the notification
3.036
And
I shutdown Tails and wait for the computer to power off
13.052
And
I start Tails from USB drive "__internal" with network unplugged
1:20.854
And
I enable persistence
18.076
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
56.862
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
44.652
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.138
And
the network is plugged
0.123
Then
the Additional Software upgrade service has started
0.322
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112